äëÿ òåõ, êòî èíòåðåñóåòñÿ: îáíîâëåíèå ïðèáîðîâ Îïöèè

[alex_pescaru]

http://www.freel2.com/forum/topic19314.html

[sirmik]

Hi Alex!
How to switch this feature on for MY2013 ?

ñïàñèáî Alex

[Lee33]

î÷åíü èíòåðåñíî... òîëüêî ñàì ôèã ñäåëàåøü...

[alex_pescaru]

Sorry for writing in English as I don't know Russian as well as I would want...

The feature was enabled by modifying the firmware (the EXE part) and not some configuration data.
So, the MY2013 cluster, as it has a different hardware and therefore firmware, must be studied and modified too.
For my type of cluster I had a "guinea pig" cluster bought from ebay and so it was easy to do the studying and programming.
As I don't have a MY2013 cluster/car around for testing purposes, it will be pretty hard to do it on MY2013.
But what I've done may be a start and maybe someone on here will have a go and do it for MY2013 and later too. It will be nice!

[sirmik]

We would be very appreciated , if you gave us some hints of reprogramming or the direction of where we should dig , for those of our forum-mates who understand all these technician moments

Thank you in advance

[DDN]

Õîðîø íà âðàæåñêîì ÿçûêå òåêñòû êîïèðîâàòü

[Jason]

Èíòåðåñíî, ïîñëå ïðîøèâêè ýòèì ôàéëîì ïðèáîðêà ñòàíåò íà àíãëèéñêîì ?...

[Greg777]

alex_pescaru, great job, thank you! Can you please tell us little more about VBF editing?

[alex_pescaru]

Jason,
I hope that I understand correctly...
Language (and the configuration, in general) will remain the same. If the instrument language is set to Russian, will remain that way.
If you flash only this file, the Car Configuration File (CCF) wont be affected.

sirmik, Greg777,
You take the firmware file (VBF) from the http://www.diagnosticdelivery.com/idscentral/
You take the corresponding debugger/disassembler from https://www.hex-rays.com/products/ida/ (In my case the cluster has a Fujitsu FR microcontroller - MB91F013)
You study the firmware and, when you understand it properly, start to experiment and add/remove pieces of code at machine code level.
Flash it to the cluster with a proper tool (SDD or aftermarket) and check the results.

[Greg777]

alex_pescaru, is there any way (except of disassembling) to know which processor type used in a module? Automatically windshield heat switching really makes me hurt )